Simple Device Prep
Mastering device prep with the UltraSert™ Pre-loaded Delivery System takes very few cases. For greater efficiency in the OR, the system is ready for implantation in just three simple steps.
Watch this short video to see how simple it is to prepare the UltraSert™ Delivery System for implantation.
Step 1: Inject OVD
Insert cannula of approved ophthalmic viscosurgical device (OVD)* perpendicular to the device through the OVD port on the blue lens stop.
Inject approximately 0.2 mL of OVD until it reaches the “fill-to” line on the nozzle tip.
Step 2: Remove lens stop and plunger lock
Pull the blue lens stop forward slightly, and lift up and away from device to remove. Remove the plunger lock by pulling it straight up.
Step 3: Advance & inspect
Advance the blue plunger until the leading edge of the IOL optic is even with the line on the nozzle. Inspect to ensure the blue plunger tip is touching the trailing edge of the IOL optic and the trailing haptic is folded.
Now the device is ready for delivery, which should take place within three minutes of advancement.
*Consult your Alcon sales representative for a list of approved OVDs.